Manufactured in Germany, the Engelhart HPM 2000 handrail-profiling machine has
been specially designed for the rapid and safe profiling of spiral, curved and
Using its patent feeding system, the HPM-2000 can profile handrails with a minimum inside radius of 4”.
The unique feeding system keeps the rail square to the cutter as the feed mechanism pulls the rail blank into the machine.
Handrails can be glued up using thin veneers to achieve maximum bend radius as well as eliminate spring back. The HPM-2000 will also eliminate the need for bending rail and allow for any profile to be reproduced easily. Tooling for standard and custom profiles is readily available
The HPM-2000 will take the skill away from the operator at the same time, increasing quality and reducing labor costs.
Width of workpiece: 9.8 inches (250 mm) maximum
Height of workpiece: 2.9 inches (75mm) maximum **
Inside radius: 3.9 inches (100mm) minimum
Profile motor: 2.2 kW (2.93 hp) (Direct Frequency drive)
Motor Rpm: Variable 8000 rpm - 12000 rpm
Feed motors 2 @ . 37 kW. (.49 hp) each (Infinitely Variable)
**3.9” (100mm)height available
Special size machines available on request